Clear PETG plastic sheet
Clear PETG has a light transmission of 90%, the same as glass, use for glazing on architectural models, model railway buildings, dolls houses. Suitable for thermoforming.
- Sheet size 1.0 x 312 x 625mm
- Clear PETG also called extruded copolyester or Vivak.
- Can be cut to your artwork in our Laser Department
Storage
- Do not expose the sheet with the protective film to outside weathering.
- When stored in stacks, protect against heat, moisture and direct sunlight.
Thermoforming
- Vivak sheets are suitable for thermoforming at temperatures between 120°C and 160°C.
- Vivak sheets do not need to be pre-dried.
- Always remove the protective masking before heating the sheet.
Usage
- Vivak sheets should not be exposed to temperatures exceeding 65°C
Cleaning
- As soon as possible after installation, wash the sheet with lukewarm water containing a neutral detergent and subsequently rince it with clean water. Use a soft sponge, a wool cloth or a chamois for this purpose.
- Never use sharp objects to remove stains.
