Honeycomb board.
Honeycomb boards are lightweight and sturdy, they can be used for shop displays, for trade shows and exhibitions, for making furniture or as a base board for a model.
- Sheet size: 20 x 750 x 1000mm*
- Sheet thickness: 20mm
- Weight: 133gsm
- Can be cut with a circular saw, a fret saw or a coping saw.
- Circular lines can be cut using a freehand blade.
*Dimensions are of the usable area (please note that larger sheets are sometimes supplied).
The honeycomb board is often used for stage construction for film, theatre or television, and as a carrier board that can be covered with drawings, photographs, placards etc.
Note:
Holes can be cut in the honeycomb board by means of a drill or a stylus. If you are to hang the board, we recommend that you put a piece of tube or a rolled up piece of paperboard in the hole.
Bonding: the paperboard covered boards can be two-dimensionally glued by means of spray glue or X-FILM.
When gluing an edge at a right angle you should not attempt to simply butt the board up against the panel to be joined because the “hollow” board provides very little gluing surface.
The boards can be glued onto or laminated with two-sided X-film or spray glue.
