Description
Mold Star Series Silicone Rubber
Mold Star Series Silicone Rubber are addition-cure silicone mould rubbers ideal for beginners and experts alike, featuring a 1A:1B by volume mix ratio and low mixed viscosity. Cured Mold Star is tear resistant, exhibits minimal long-term shrinkage, and will last a long time in your mould library.
- Applications include casting wax, gypsum, resins, concrete and other materials.
- Heat resistant up to 232°C, so suitable for casting some low-temperature melt metal alloys.
- No gram scale or vacuum chamber required.
- Use IPA Isopropyl to clean up any uncured material.
- Mold Star has a limited shelf life and should be used as soon as possible.
- Technical Data
- SDS
|
Product Name |
Pot Life |
Demould Time |
Net Weight |
|---|---|---|---|
|
Mold Star 15 SLOW (Trial Unit) |
50 minutes |
4 hours |
0.9 Kg |
|
Mold Star 16 FAST (Trial Unit) |
6 minutes |
30 minutes |
0.9 Kg |
|
Mold Star 30 SLOW (Trial Unit) |
45 minutes |
6 hours |
0.9Kg |
NOTE: Mold Star is designed for making pour moulds and is not compatible with Thi-Vex® thixotropic agent. As with any addition-cure or platinum silicone rubber, exposure to sulphur and latex can lead to cure inhibition. Do not use sulphur-based modelling clay or wear latex gloves while processing Mold Star.
Information sheet available for our Resin & Metal Casting Service (1.8Mb PDF).
Unfortunately, due to postal restrictions, we cannot send this item overseas.
